Article of the Month in 2017
FIG publishes each month the Article of the Month. This is a high-level paper 
focusing on interesting topic to all surveyors. This article can be picked up 
from an FIG conference or another event or it can be a paper written directly 
for this purpose.  
	
 
	
		-  December 2017 is written by José António TENEDÓRIO 
		and Luís MARQUES (Portugal): How 
		can 3D models and augmented reality visualization based on mobile 
		platforms enhance the value of urban heritage? This paper was chosen 
		among numerous papers that constituted the program of the FIG Commission 
		3 workshop in November 2017 in Lisbon. The main idea of the Paper is 
		about Digital Representations in the relation between Technology, Agents 
		and Several Knowledge Domains, and is aimed at analyzing the Augmented 
		Valuation of Cultural Heritage based on Geographic Information 
		Technologies (GIT). 
 
		 
				 
		- November 2017 is written by Jinyue WANG, Martin 
		METZNER and Volker SCHWIEGER (Germany): Accuracy and Quality Assessment of Various Digital Road Maps for 
		Wrong-Way Driving Detection on German Autobahn. This paper was 
		presented at the FIG Working Week 2017 in Helsinki, Finland, 29 May – 2 
		June. Ghost driver incidents become a major concern for every individual 
		road user. In order to enhance road safety, particularly by entering and 
		exiting an autobahn, a telematics system for preventing ghost driver 
		incidents will be implemented within the research project Ghosthunter. 
		This study aims to investigate the use potential of digital road maps 
		for preparation and development of an intelligent wrong-way driving 
		detection system. 
 
		
  
		- October 2017 is written by Vassilis GIKAS, 
				Harris PERAKIS, Allison KEALY, Guenther RETSCHER, Thanassis 
				MPIMIS,
				Constantinos ANTONIOU (Greece, Australia, Austria, Germany):
				Indoor Parking Facilities Management Based on RFID CoO 
				Positioning in Combination with Wi–Fi and UWB 
		This paper is a peer review paper that was presented at the FIG Working 
		Week 2017. Fixed geometric constraints, imposed by man-made structures, 
		weather influences, etc., make it possible to restrict positioning. In 
		this study, these problems will be subjected to a number of tests and a 
		low-cost solution will be offered.
 
		
  
		- September 2017 is written by Wallace 
				MUKUPA, China,  Gethin Wyn ROBERTS, United Kingdom, Craig 
				Matthew HANCOCK, China, Khalil AL-MANASIR, China:
		Correction of Terrestrial LiDAR Data Using a Hybrid Model 
		This paper is a peer review paper that was presented at the FIG 
				Working Week 2017. Wallace Mukupa received a ph.d. grant from 
				FIG Foundation in 2016 and one of the results is this peer 
				review paper. In this paper, a hybrid method for correcting 
				intensity data is presented. 
  
		 
		- August 2017 is written by Hannu Koivula, Antti 
		Laaksonen, Sonja Lahtinen, Jaakko Kuokkanen, Simo Marila, Finland:
		Finnish Permanent GNSS Network, FinnRef 
		
		
 For the first time 
		FIG Commission 5 decided to award the best Commission 5 
		paper of the FIG Working Week with the NavXperience Award. The 
		price 2017 was awarded to Hannu Koivula et al. for their contribution.  
		The paper is focusing on renewing the FinnRef network. The NRTK service 
		will be improved so that it fulfills the internal surveying needs of the 
		NLS. For this purpose the NLS has initiated a project for 2017-2019 to 
		densify FinnRef with 20-30 new GNSS stations. 
		
  
		- July 2017 is written by Olli NEVALAINEN, Tomi ROSNELL, Teemu HAKALA, Eija 
		HONKAVAARA, Roope NÄSI, Kimmo NURMINEN, Finland:
		Unmanned Aerial Vehicles in 
		Municipality Level 3D Topographic Data Production in Urban Areas.
		
 This paper was presented at the FIG Working Week 2017 in Helsinki, 
		Finland, 29 May – 2 June. Te paper describes general properties and 
		characteristics of different types of UAVs. Results showed that UAV 
		photogrammetry provides low cost tool for producing topographic data in 
		urban areas, especially when small areas are of concern.
				  
		 
		 
		- June 2017 is written by Fernando SOARES, Maria João HENRIQUES and César ROCHA, 
		Portugal:
 Concrete Block Tracking in Breakwater 
		Models  This paper was presented at the FIG Working Week 2017 in Helsinki, 
		Finland, 29 May – 2 June. This paper focuses on breakwater(BW) and 
		evaluate the effectiveness of the shape and of the protective elements 
		to save the harbour. This study proposes a methodology to estimate 
		displacements of concrete blocks of the outer layer, also called 
		protection layer, of rouble-mound breakwater models.  
		
  
		- May 2017 is written by Maarit KAHILA and Anna BROBERG, 
		Finland: Making cities wiser - Crowdsourcing for 
		better decisions 
 This paper will be presented at the FIG Working Week 2017 in Helsinki, Finland, 29 May – 2 June. 
		The paper presents different innovative case studies from Finland and 
		abroad where Maptionnaire (a leading solution for collecting, analyzing 
		and discussing resident insight on a map) has been used. Based on the 
		findings a new public participation model has been drafted.  
		 
		 
		- April 2017 is written by John BROCK, Australia:
		HADRIAN’S WALL: Boundary Monument for 
		the Northern Frontier of Roman Britannia!  
 This paper will be presented at the FIG Working Week 2017 in Helsinki, 
		Finland, 29 May – 2 June. Much hypotheses and over-thinking has taken place over hundreds of 
		years in an effort to attribute purposes for the raison d’etre of the 
		wall across northern Britain erected at the behest of the formidable 
		Roman Emperor whose name has been ultimately used to describe this 
		intriguing edifice. John Brock makes his own offering to the discussion 
		table about what served as the main reasons for the erection of such a 
		notable memorial to the time of the renowned civilization during the 
		second century. 
		
  
		- March 2017 is written by Arvo KOKKONEN, Jani 
		KYLMÄAHO and Heli URSIN, Finland:
		Arctic Spatial Data Infrastructure
		(Arctic SDI)
 This paper will be presented at the FIG Working Week 2017 in 
		Helsinki, Finland, 29 May – 2 June. Understanding and responding to the 
		impacts of climate change and human activities in the Arctic, requires 
		accessible and reliable data to facilitate monitoring, management, 
		emergency preparedness and decision making. The Arctic Spatial Data 
		Infrastructure (Arctic SDI), was established to address the need for 
		readily available spatial data in the northern areas of the globe. The 
		paper focuses on the collaboration. 
		
  
		- February 2017 is written by Zaid ABUBAKARI, 
		Netherlands, Paul VAN DER MOLEN, Netherlands, Rohan M. BENNETT, 
		Netherlands, Elias DANYI KUUSAANA, Ghana:
		Land consolidation, customary lands, and Ghana’s Northern Savannah 
		Ecological Zone: An evaluation of the possibilities and pitfalls .
		This paper was presented at the International Symposium on Land 
		Consolidation and Land Readjustment – held in Apeldoorn, The 
		Netherlands, 9 – 11 November 2016. The paper demonstrates that Land 
		Consolidation - as an existing and proven approach - can be used very 
		well for future challenges - as mitigation of and adaptation to climate 
		change effects. 
		
		
 
		
  
		- January 2017 is written by 
				František PAVLÍK, Arnošt MÜLLER, Svatava MARADOVÁ and Michal 
		GEBHART, Czech Republic: Adaptation Measures for Climate Change in the Process of Land 
		Consolidation. This paper was presented at the International 
		Symposium on Land Consolidation and Land Readjustment – held in 
		Apeldoorn, The Netherlands, 9 – 11 November 2016. This paper was chosen 
		as being most representative for modern land consolidation in the 
		context of sustainable development. It focuses on how climate changes 
		cause higher demand on the land consolidation process and introduce new 
		challenges especially in the design of adaptation measures through the 
		Common Facilities Plan as an important part of land consolidation 
		process in Czech Republic.
 
	 
	  
     |